Big Agnes Tiger Wall 2 Carbon Footprint

Description

Tiger Wall 2 Carbon FootprintProtective ground cover for Tiger Wall 2 Carbon

To extend the life of your tent floor, we recommend using a Big Agnes footprint or ground cloth. The Big Agnes footprint also enables you to pitch a lightweight, Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles, and stakes.

FeaturesCompatibilityCompatible with Tiger Wall 2 CarbonNoteNot compatible with other Tiger Wall tent modelsFast FlyFast Fly setup availableSpecsTotal Weight4ozPacked Size8″ x 5″ x 1.5″MaterialsFabric15D Nylon R/S 1200mm PU/SilStorageGuidelinesAlways make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.CleaningLight CleaningFor light cleaning, sponge the product with warm water (not hot).Supplies NeededWash basin (or bath tub), Warm water (not hot), Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash), SpongeStep 1Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.Step 2Apply waterproof gear specific wash and gently work into fabric with sponge.Step 3Rinse gear thoroughly.Step 4Hang it up to dry.Step 5Triple check that your gear is completely dry before storage or use.Important NotesWarningsDo not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing. Never use hot water, bleach, liquid detergents, or dishwashing liquids. Allow to dry COMPLETELY before storage or use. Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.Seam SealingFactory SealedBig Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.ZippersMaintenanceKeeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.Repairs and WarrantyCoverageAll Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.Tiger Wall Carbon Set Up InstructionsStep 1Remove contents from stuff sack. Spread out the tent body.Step 2Assemble the main pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.Step 3Position the assembled main pole on top of the tent body. The main pole is in the shape of a Y. Position the base of the Y at the foot end of the tent with the top of the Y at the head of the tent.Step 4Insert the pole tips into the grommets at the head and foot of the tent body.Step 5Attach the plastic clips on the tent body to the main pole.Step 6Place the short crossover pole on top of the main pole. Insert the tips of the crossover pole into the small pole tip pockets located above each door.Step 7Stake out the two cord loops at the head of the tent and the three loops at the foot end.Step 8Drape the fly over the tent body and match the colors of the webbing on the fly with the webbing on the body.Step 9Insert the tips of the crossover pole into the small pockets located on the underside of the fly.Step 10Make sure the webbing at the corners of the fly is completely slackened. Attach the buckles on the fly to those on the tent body.Step 11Tighten the webbing on each buckle as needed to keep the fly taut.Step 12Stake out the vestibules then stake out all remaining guylines.Step 13For increased ventilation, hook the bottom of the vestibule door to the toggle at the top of the zipper.Field RepairEmergency RepairSeparate 6″ length pole segment included for emergency field repair. Slide repair pole over the break to act as a splint. Secure splint in place with tape.Fast Fly Set UpNoteIf you purchase the optional Big Agnes footprint for your tent, it will enable you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly configuration requires the footprint, tent fly, poles and stakes.Step 1Lay the footprint on the ground and stake out the five cord loops.Step 2Assemble the pole. To ensure each pole section is fully seated, insert each pole section into the next by hand instead of allowing the shock cord to snap them together.Step 3Position the assembled pole on top of the footprint. The main pole is in the shape of a Y. Position the base of the Y at the foot end of the footprint with the top of the Y at the head of the footprint.Step 4Insert the pole tips into the grommets at the head and foot of the footprint.Step 5Insert the tips of the crossover pole into the small pockets located on the underside of the fly.Step 6With the crossover pole now attached to the fly, drape the fly over the main pole. Match the webbing colors on the fly with the matching colors of the webbing on the footprint.Step 7Make sure the webbing at the corners of the fly is completely slackened. Attach the buckles on the fly to those on the footprint.Step 8Tighten the webbing on each buckle as needed to keep the fly taut.Step 9Stake out the vestibules then stake out all remaining guylines.Helpful Hints For Tent Set UpPracticeOur tents are easy to set up but we suggest you practice once at home before using them for the first time to avoid late night bickering with tent mates while fumbling around in the dark.Clear SiteBefore pitching tent, clear campsite of debris that may pierce tent floor.StakingWe recommend staking out all corners, vestibules and guylines to increase space and ventilation. Securely staking out your tent and all guylines is crucial to maintaining the structural integrity of your tent.Stuff SacksHang onto your stuff sacks or they’ll blow away and create backcountry litter.Pole SleevesPull on the pole sleeve fabric when inserting poles to avoid any bunching in the material. Push rather than pull poles through pole sleeves.